促销中

HW3D-01 1000W Portable 3D Curved Surfaces Corona Treatment controller with double nozzle

$2,256.00

SKU: 2255800597972151 分类: , ,

描述

HW3D-01 1000W Portable 3D Curved Surfaces Corona Treatment controller

with double nozzle

remark:

1. send by air no include oil. when you get it. need add oil.

2. send by sea can include oil

add oil:
Corona: refueling: plus 25 # transformer oil (insulation and heat); a fuel plus, no need to refuel;
The amount of refueling: the bottom of the plastic screw hit the oil, that is, to stop refueling.
Step:
1. Clean the screws before pouring oil, so easy to observe;
2. Add the appropriate amount of oil, the plastic screw into the screw, and then come out to see if the bottom of the screw encountered oil, if not met, then continue to refuel;
3. Bottom of the end of the screw oil at the end of not more than 1CM;

add this oil. the picture for you reference

NOTE:The difference between a single nozzle or a double nozzle.

Single-nozzle processing of one product or one side, double-nozzle processing of two or two sides at a time

Main Characteristics:

1.With high-energy plasma which is produced by low temperature plasma to treat the surface of heterozygote surface,the output of corona is continuous adjustable.

2.It has kinds of protection such as over voltage,over current and short circuit protection.

3.The muzzle may hand hold or fixing mounting.

 

Technical Specification

Item: HW-3D-02

Treating head: 25mm/ 50mm/80mm/ width

Mains supply: 220v, AC plusmn 5%, 1 ⌀

Mains frequency: 50Hz plusmn 5%

Speed: As per material and product

Output frequency: 30 Khz

App.output power: 1000w

corona output: a.Constant at same speed b. No influence of supply voltage

Dynes level: 38-44 Dynes/cm

 

Input Current: 2.5-3A

Output Voltage: 15KV

Output Power: 500w

Best Treatment Distance: 8-10cm

Max Treating Width: 5cm

Corona Treatment Application: printing,hot stamping,pad printing ,adhesive coating,laminating.

Corona Treating Material: PP,PE,PS,Plastic,metal Film

 

Applications:

3D Corona treatment system readily solve surface adhesion problems for a wide variety of products and applications:

bull Caps and closures
bull Painting and decorating
bull Cups and containers
bull Consumer products
bull Extruded pipe, tubing, profiles
bull Medical and health care products
bull Electrical/electronic components
bull Direct printing
bull Hot stamping
bull Pad printing
bull Adhesive coating
bull Wire and cable

bull Laminating
NOTE:The 3D corona treatment normally for below products.Make the printed picture color more stronger and not easy to fall off.
reminder: it is corona controller only control corona treatment frame. can not print pictures;
below printed picture easy fade off, it need 3D corona treatment to process it.

其他信息

Type

DC/DC Converters

Certification

None

Origin

Mainland China

Model Number

HW3D-01 1000W Portable 3D Curved Surfaces Corona Treatment controller