促销中

MA860H Stepping Motor Drive Driver Engraving Machine

$52.64

SKU: 2255800600220305 分类: , ,

描述

MA860H Stepping Motor Drive Driver Engraving Machine 

Description

Features:

High performance, cost-effective

Supply voltage up to 80VAC or +110VDC

Output current up to 7.2A

Self-adjustment technology

Pure-sinusoidal current control technology

Pulse input frequency up to 300 KHz

TTL compatible and optically isolated input

Automatic idle-current reduction

16 selectable resolutions in decimal and binary, up to 51,200 steps/rev

Suitable for 2-phase and 4-phase motors

Support PUL/DIR and CW/CCW modes

Short-voltage, over-voltage, over-current and short-cicuit protection

Introduction :

The MA860H is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

General Specifications :

1

Connector P1 Configuration

2

Connector P2 Configuration

Pin Function

Details

VDC

Power supply, 24~80 VDC, Including voltage fluctuation and EMF voltage.

GND

Power Ground.

A+, A-

Motor Phase A

B+, B-

Motor Phase B

Selecting Microstep Resolution and Drive Output Current

Microstep resolution is set by SW5, 6, 7, 8 of the DIP switchas shown in the following table:

The first three bits (SW1, 2, 3) of the DIP switch are used to set the dynamic current.

Select a setting closest to your motors required current.

4

motor driver (2)motor driver (3)

其他信息

Motor Type

DC Motor

Origin

Mainland China

Power Supply

DC

Model Number

MA860H Stepping Motor Drive Driver Engraving Machine